WinRAR 5.8.0 Beta 4 – Descomprime y Comprime tus archivos

WinRAR 5.5 Beta 3 - Descomprime y Comprime tus archivos
DESCRIPCIÓN

WinRAR 5.8.0 Beta 4 – Descomprime y Comprime tus archivos – WinRAR es un potente programa compresor y descompresor de datos multi-función desarrollado por RarLab, una herramienta indispensable para ahorar espacio de almacenamiento y tiempo de transmisión al enviar y recibir archivos a través de Internet o al realizar copias de seguridad. más información …

WinRAR sirve para comprimir todo tipo de documentos o programas de forma que ocupen menos espacio en disco y se puedan almacenar o trasmitir por internet mas rapidamente.

RAR y WinRAR son programas shareware, esto significa que puede probarlos gratuitamente durante 40 días, pasado este periodo de prueba deberá comprar una licencia o desinstalarlos de su ordenador.

La licencia es válida de por vida y sin ningún coste ni cuota extra de mantenimiento. más información …

También dispone del descompresor de ficheros RAR gratuito UnRAR para múltiples plataformas y del compresor y descompresor gratuito PocketRAR para Pocket PC.

DATOS TÉCNICOS

WinRAR 5.8.0 Beta 4

Fecha añadida: 18 de noviembre de 2019 | Peso: 4.32 Mb | Idioma: Inlges, Español | Medicina Inc. | Winrar | Windows/Linux/Mac

CARACTERÍSTICAS

Potente: WinRAR es un compresor de archivos técnicamente superior. Permite mayores relaciones de compresión que otras herramientas de compresión para PCs, especialmente en ficheros ejecutables, bibliotecas de objetos y grandes archivos de texto, dispone de un algoritmo de compresión altamente optimizado para datos multimedia así como de compresión sólida.

Seguro: protección con contraseña con cifrado Rinjdael (AES-128), bloqueo contra modificaciones, protección avanzada contra daños que permite recuperar ficheros en mal estado, verificación anti-virus configurable y eliminación segura para eliminar datos sensibles.

Escalable: RAR es el primer compresor que implementa manejo de ficheros de 64 bits, lo que le permite manejar grandes cantidades de ficheros y tamaños muy grandes (solo limitado por el sistema operativo). RAR soporta ficheros y archivos de hasta 9.000 PetaBytes. El número de ficheros archivados es, a efectos prácticos, ilimitado.

Facil de usar: Asistente para usuarios noveles, integración con el Explorador de Windows, versiones en castellano, catalán y gallego así como ayuda y soporte en castellano.

Versatil: Puede crear archivos multi-volumen (partidos) de cualquier tamaño, archivos auto-extraíbles programables y también archivos auto-extraíbles multi-volumen.

Compatible: programas gratuitos de descompresión de archivos RAR para múltiples plataformas (Windows, OS/2, Mac OSX, BeOS, Linux, FreeBSD, Solaris, BSD Unix, HP_UX, Irix, Pocket PC, … ) así como soporte completo de archivos ZIP 2.0 y descompresión de archivos CAB, ARJ, LZH, TAR, GZ, ACE, UUE, BZ2, JAR, ISO, Z, 7Z. WinRAR también soporta atributos de seguridad y flujos de datos en ficheros NTFS.

Ideal para copias de seguridad: Todas las operaciones de compresión y descompresión pueden automatizarse a través de su completa interface de línea de órdenes, puede almacenar varias versiones de cada fichero y además puede añadir información redundante que permite recuperar datos de ficheros dañados.

Económico: Las licencias de uso son validas de por vida y para cualquier versión, para cualquier sistema operativo y para cualquier idioma. Una vez comprada la licencia no hay ningún tipo de coste adicional de por vida. Además hay importantes descuentos para compras corporativas, por ejemplo, mientras que una sola licencia cuesta 29,95 euros, al comprar 100 el coste baja a los 9 euros por licencia y sigue bajando a medida que aumenta el número de licencias adquiridas.

NOVEDADES
Version 5.80
   
   1. "Preserve source files last access time" option on "Time" page
      of archiving dialog permits to preserve the original last access time
      of archiving files.

   2. Command line -tsp switch can be used to preserve the original
      last access time of archiving files. It can be combined with other
      -ts switches, like: rar a -tsc -tsp arcname files

   3. It is allowed to combine several modifiers in the same -ts switch.
      For example, we can use -tscap instead -tsc -tsa -tsp.

   4. WinRAR can read default values of command line switches from rar.ini
      text file, which can be stored either in the same folder as WinRAR.exe
      or in %APPDATA%\WinRAR folder. This file includes strings in following
      format:

      switches=<any RAR switches separated by spaces>
      switches_<command>=<any RAR switches separated by spaces>

      First applies switches to all and second to individual commands.
      For example:

      switches=-m5 -s
      switches_x=-o+

      Most of switches specified in rar.ini are used only in the command line
      mode. Some switches can be applicable both in shell and in command line
      modes. Previously this rar.ini format was supported only by console RAR.

   5. Command line -agf<default_format> switch specifies the default format
      string for -ag switch. It has a practical value only if placed to
      rar.ini configuration file or to RAR environment variable.
      For example, if we set RAR environment variable to -agfYYYY-MMM-DD,
      we can use -ag without a parameter with YYYY-MMM-DD format string
      assumed.

   6. Switches -ed and -e+d can be used in archive processing commands
      for any combination of RAR and archive operating systems.
      In older versions RAR for Windows could not use them for Unix RAR
      archives also as RAR for Unix for Windows RAR archives.

   7. Previously "Test" command failed to check integrity of archived NTFS
      alternate data streams and issued "Unknown data header format" warning
      if size of such stream exceeded 16 MB. This limitation is removed now.

   8. Archiving speed for large NTFS alternate data streams on multi-core
      CPUs is increased.
   
   9. "Find" command:

      a) when extracting encrypted files directly from "Search results"
         dialog, password prompt was issued for every found file
         even if all files belonged to same archive.

         Now password is requested only once per archive;

      b) Ctrl+A hotkey selects all files in "Search results".

  10. Archive comment window:

      a) previous versions did not allow to use Ctrl+W shortcut to close
         WinRAR when comment window had keyboard focus. Now Ctrl+W works
         also from comment window;

      b) mouse wheel is supported also for comments with ANSI Escape sequences;
      
      c) for some lenghty comments with ANSI Escape sequences last line
         of comment was visible only partially even after scrolling up to
         bottom. It is displayed comletely now.

  11. Maximum path length for files in 7z archives is increased up to
      2048 characters. While such lengthy paths were already supported
      for RAR and ZIP formats, previous versions limited the path length
      to 260 characters for 7z archives.

  12. If archive or file name is too lengthy to fit to archiving
      or extraction progress window, it is truncated. Previously such names
      were truncated at the end, making the file extension invisible.
      This version truncates them removing the path component and symbols
      in the middle, but preserving beginning of file name and file extension.

  13. If files selected for archiving differ only by extension,
      a proposed archive name is based on their name part.
      For example, archiving dialog will propose Readme.rar if we selected
      Readme.txt and Readme.doc.

      Previous versions always generated the archive name based on parent
      folder name for several selected files.

  14. "Symlink" and "Hardlink" is diplayed in "Type" column for symlink
      and hardlink records in .tar archives. Previous versions displayed
      a proper type for such records only in .rar archives.
         
  15. Copying and pasting files from large archives could fail if
      extraction took a lot of time. This version can paste files from
      such archives as well, but we have to start extraction already on
      "Copy" command and not on "Paste" to achieve this.
   
  16. Similarly to RAR5 volumes, recovery volumes in RAR4 format use
      the same width of volume number field as corresponding RAR volumes.
      While previously WinRAR could create arc.part01.rar and arc.part1.rev
      in RAR4 format, now both types of volumes will use "part01".

  17. "Set font..." button in "Settings/File list" also changes the folder
      tree panel font. Previously it changed only the file list font.

  18. "Find files" and command line mode "i" commands:

      a) if "Use all tables" option or "t" modifer of "i" command are used,
         additionally to already supported ANSI, OEM and UTF-16 encodings
         WinRAR will search the specified string in UTF-8 files as well;
      
      b) better support for Unicode text strings;

      c) better performance, especially for case insensitive search;

      d) hexadecimal search output includes both text and hexadecimal
         representation of found matches.

  19. File and total progress bar is displayed when unpacking
      tar.bz2, tar.gz, tar.lz, tar.xz, tar.z archives.
      
      Previously only the total progress was displayed properly for tar.bz2,
      tar.gz and tar.z. Neither file nor total progress was displayed
      for tar.lz and tar.xz.

  20. "File list/Files/Exact sizes" option also changes the file size format
      in WinRAR status bar.
   
  21. Bugs fixed:

      a) if non-existent path is specified in archive name in archiving
         dialog, WinRAR proposes to create such path. Previous versions
         could create such path in WinRAR start-up folder instead of
         currently displayed folder;

      b) WinRAR could crash when adding the recovery record in RAR5 format
         on CPUs not supporting CPUID EAX=7 command and returning random
         data in response. These are some CPUs from early 2000s;

      c) WinRAR failed to create archives after dragging files with
         right mouse button in Windows shell, dropping them to another folder,
         selecting "Add to archive..." in context menu and enabling
         "Put each file to separate archive" option;

      d) "winrar r *.zip" command repaired only the first ZIP archive
         in the set if all archives had numeric names like 1.zip, 2.zip
         and signatures in the beginning of archives were missing;

      e) previous WinRAR version failed to unpack folder records
         in archives created by RAR 1.50;
      
      f) in rare cases WinRAR failed to extract and reported an error
         for valid .gz archives produced by some compression optimization
         tools;

      g) progress bar in tray icon never reached 100% in high DPI mode;

      h) creation and last access time was not displayed for archived folders
         if folder records were stored in archive after folder contents;

      i) "Skip encrypted archives" option in "Convert archives" command
         did not work for 7-Zip archives with headers encryption.
CAPTURAS
ENLACES DE DESCARGA

WinRAR 5.8.0 Beta 4

| ENLACE DIRECTO 32 Bits | ENLACE DIRECTO 64 Bits |

SOLO LICENCIA Y TRADUCCIÓN AL ESPAÑOL

| MEDIAFIRE

CONTRASEÑA/PASSWORD PARA DESCOMPRIMIR

www.bacterias.mx

WEB DEL AUTOR

WINRAR

Add a Comment

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *